CAD / CAM / CNC Engineering
CNC Datacommunication
CNC Software Development

Systeemvereisten

 

 

PowerMILLPowerSHAPEFeatureCAMPowerInspectArtCAMFusion
 

GibbsCAM
 

The system supports all monitors capable of running at a resolution of 800x600 or higher. The GibbsCAM window is dynamically resizable from approximately 640x525 to the highest resolution your monitor will support.  Please be aware that with monitors running higher monitor resolutions you will need more RAM to support solids and Cut Part Rendering as well as a better video card.  Recommended and actual requirements do not have a definite value.  Your requirements will vary depending on the complexity of the part you are working with.  If you use only the basic Mill or Lathe modules the minimum requirements shown below are quite adequate.  We recommend Keeping Windows fully up to date with all service packs and updates as they are released.

LAPTOPS - If you are considering the purchase of a laptop for use with GibbsCAM please call technical support at 800-654-9399.  Most modern laptops come with dual video cards which can cause stability problems.  It is important that you are able to disable the Intel video card at the BIOS level for the computer and some manufacturers do not allow this.

Minimale systeemvereisten

  • Windows 2008 Server, Windows 7, Windows 8 or Windows 10  (with all available Windows updates)   (with all available Windows updates)
  • Intel Pentium 4 or newer (including Celeron 1.7Ghz (or higher) and Xeon, Pentium M, Core, Core 2, and Core i5/i7) AMD Athlon 64 or newer (including Sempron 64, Turion 64, and Phenom)
  • 1GB RAM with a minimum of 64 MB not in use by other applications
  • A quality Nvidia or AMD (ATI) 3D accelerated video card with the latest drivers installed
  • 512MB of available hard drive space (for virtual memory usage and temporary file storage)

Aanbevolen systeemvereisten

  • Windows 7, Windows 8 or Windows 10 (with all available Windows updates)
  • Intel Pentium Core 2, and Core i5/i7) AMD Athlon 64 or newer (including Turion 64, and Phenom)
  • 4GB RAM with a minimum of 256 MB not in use by other applications
  • A quality Nvidia or AMD (ATI) 3D accelerated video card with the latest drivers installed
  • 1GB of available hard drive space (for virtual memory usage and temporary file storage)

Optimale systeemvereisten (voor complexere 3D stukken)

  • Windows 7, Windows 8 or Windows 10 (with all available Windows updates)
  • Intel Pentium Core i5/i7
  • 8GB RAM (16GB or more is recommended for very complex parts)
  • A quality Nvidia or AMD (ATI) 3D accelerated video card with the latest drivers installed
  • 1GB of available hard drive space (for virtual memory usage and temporary file storage)

Bron: http://support.gibbscam.com/kb/article/000016

Updated 19 Aug 2017

 

Contact

4D CAM
Beekveldstraat 67 bus1
9300 Aalst, België
e-mail: info@4dcam.be
T: 053 80 45 03
BTW BE 0478.378.759

 

Metal AllianceLid van AgoriaKMO Portefeuille